We appreciate your interest in part number 1241057.00, which is currently available for purchase here on Jet Force Aero. For your reference, this item is produced by Parker Hannifin Corporation and is listed with the NSN 4720-00-819-5370, as well as the description “Hose Assembly Nonmetallic.” If this matches your requirements, we encourage you to fill out the Request for Quote (RFQ) form featured on this page to receive tailored purchasing options on part number 1241057.00. All that we ask is that you submit as many details about your procurement needs as possible, such as your desired quantity, budget, and anticipated fulfillment timeframe, as this will enable our specialists to craft an ideal response for you.
Note : We Will Not Share Your Information To Any Third Parties.
In addition to part number 1241057.00, be sure to explore our website further for related items produced by Parker Hannifin Corporation under the CAGE Code 98441 as you wish. We also feature catalogs to help you find additional options that are categorized under FSC 4720 Hose and Tubing Flexible and the NSN 4720-00-819-5370. Regardless of which NSN parts you need from us, rest assured that we will always treat you to affordable solutions where you never have to sacrifice quality or prompt fulfillment. We are ready to assist you with all your sourcing needs, so kick off quotation at your convenience.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-819-5370 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 008195370 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| R22733 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 10.500 INCHES |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.800 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQBD | BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE,50599,HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.375 INCHES NOMINAL 1ST END |
| ABKU | FLANGE THICKNESS | 0.375 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 1.672 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.800 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.800 INCHES NOMINAL 1ST END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.800 INCHES NOMINAL 2ND END |
| AFQN | FLANGE LENGTH | 2.400 INCHES NOMINAL 1ST END |
| AFQN | FLANGE LENGTH | 2.400 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 2.400 INCHES NOMINAL 1ST END |
| AGFF | FLANGE WIDTH | 2.400 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 1ST END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.275 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.275 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 1ST END |
| AJED | RAISED FACE HEIGHT | 0.020 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 2.121 INCHES NOMINAL 1ST END |
| AJEE | RAISED FACE DIAMETER | 2.121 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| CRXX | MEASURING METHOD AND LENGTH | 17.000 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
